Liqui Moly Air Flow Cleaner

400.00

For fast and gentle cleaning of sensitive components of the air flow sensor. The cleaner also distinguishes itself by means of very fast evaporation that is free of residues. Also, dirty sensors on vehicles with automatic transmissions can cause shifting problems. Thanks to the use of the Air Flow Sensor Cleaner, an expensive replacement of the sensor can most likely be avoided. Removes contaminants at the hot wire or the hot plate of air flow sensors. Suitable for use in gasoline and diesel engines.

Add to cart
On all order
Category :

Description

Application
Disconnect electrical connection of the air flow sensor and remove the sensor. Spray generously onto dirty components such as the hot wire or hot plate and allow the dirt to drip off. Do not touch the sensitive components of the sensor. Allow the solvent to dry completely before installation. Application is recommended every time the air filter is replaced or when problems arise.
Note: Before using on plastics that are sensitive to solvents, especially on mechanically-loaded parts, test for compatibility.

Additional information

Make

Model

sub model

Categories

Lubricating System

Quick Comparison

Liqui Moly Air Flow Cleaner removeLiqui Moly Electronic Spray removeLiqui Moly 8360 Stop Oil Smoke Diesel removeLIMITED-SLIP FRICTION MODIFIER removeLiqui Moly Radiator Stop Leak 150ml removeLiqui Moly Coolant KFS 12 Plus remove
NameLiqui Moly Air Flow Cleaner removeLiqui Moly Electronic Spray removeLiqui Moly 8360 Stop Oil Smoke Diesel removeLIMITED-SLIP FRICTION MODIFIER removeLiqui Moly Radiator Stop Leak 150ml removeLiqui Moly Coolant KFS 12 Plus remove
ImageLiqui Moly Air Flow CleanerLiqui Moly Electronic SprayLiqui Moly 8360 Stop Oil Smoke DieselLIMITED-SLIP FRICTION MODIFIERLiqui Moly Radiator Stop Leak 150mlLiqui Moly Coolant KFS 12 Plus
SKU
Rating
Price400.00300.00300.00550.00300.00400.00
Stock

Out of stock

WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Make

Model

sub model

Categories

Lubricating System

Make

Model

sub model

Categories

Lubricating System

Make

Model

sub model

Categories

Lubricating System

Make

Model

sub model

Categories

Engine

Make

Model

sub model

Categories

Lubricating System

Make

Model

sub model

Categories

Engine

DescriptionFor fast and gentle cleaning of sensitive components of the air flow sensor. The cleaner also distinguishes itself by means of very fast evaporation that is free of residues. Also, dirty sensors on vehicles with automatic transmissions can cause shifting problems. Thanks to the use of the Air Flow Sensor Cleaner, an expensive replacement of the sensor can most likely be avoided. Removes contaminants at the hot wire or the hot plate of air flow sensors. Suitable for use in gasoline and diesel engines.For fully functioning auto electrics. Reduces wear. Drives out moisture. Does not attack rubber, paints or plastics. Cleans and provides corrosion protection. Excellent lubricating qualities. Fully synthetic. Used for the care and maintenance of all electrical contacts such as plug and terminal connections, lights and fuses, ignition distributors and contact breakers, switches, battery terminals, alternators, starters, etc. For lubrication of fine mechanical components, such as door locks, jacks, rails or Bowden cables.Reduces the oil consumption of gasoline and diesel engines via the piston rings and valve guides. It prevents blue smoke and oil mist and acts against the loss in viscosity in motor oil. Improves the sealing and reduces engine noise. Provides extra protection in engines with high levels of wear. Extends the service life of catalytic converters. For all types of gasoline and diesel engines. Compatible with all commercially available motor oils. Not suitable for use in motorbikes with wet clutches.LIMITED-SLIP FRICTION MODIFIERIt’s hard to locate small leaks caused by stone chipping, porous soldered connections or hairline cracks in the cooling system on water-cooled engines – the only clue is in the reduced coolant level. This dispersion completely seals this type of leaks immediately and safeguards the combustion chamber against damage caused by coolant ingress. Compatible with all conventional coolant additives and antifreezes. Can also be used preventively. For all coolant and heating systems with and without water filters (with the exception of “low conductivity” coolants). Also suitable for aluminum and plastic radiators. 150 ml sufficient for up to 10 l of coolant.
Add to cart

Add to cart

Add to cart

Add to cart

Read more

Add to cart

Add to cart

Because the right accessories changes everything.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare
Home
Shopping
Wishlist
Account